Views
11 months ago

NRX Strap Instructions

  • Text
  • Strap
  • Mediroyal
  • Attach
  • Nordic
  • Wrist
  • Sollentuna
  • Sweden
  • Extension
  • Unlimited
  • Dorsal

Buddy Loops Material

Buddy Loops Material NRX ® 30 mm + 2 hook tabs – One strap, unlimited options! NRX ® Strap · Buddy Loops 1 2 Cut two strips in the desired width and approx 8 cm long. Adjust the width of the hook parts to the width of the strips. Apply the first strap below the joint that needs support. Place the NRX ® strap between the fingers and wrap it around. 3 4 Attach the lower strap with the hook part. Don’t over tighten. Apply the upper strap the same way and fold around the finger. Attach the hook part and test the stability. If needed adjust the strap tension Caring instructions The NRX ® strap can be washed in 40 degrees machine wash with a liquid detergent. Always use a laundry bag. Remove the hook parts before washing and let air dry. © Mediroyal Nordic AB 2018 Mediroyal Nordic AB · Box 7052 · 192 07 Sollentuna · Sweden · Tel +46 8 506 766 00 · info@mediroyal.se · www.mediroyal.se

1 – One strap, unlimited options! Finger Extension Assist, Multiple joints Material Mediroyal Manex Radial MR2285, NRX ® 50 mm and 30 mm + 2 hook tabs This application requires the Manex Radial MR2285. It needs to be shaped with the thermoplastic piece inside the support to provide a stable base for the dynamic pull. Cut a 50 mm NRX ® strap in approx 6-7 cm length. Round the edge and cut two holes for the fingers. The holes should be big enough to be able to slide the strap onto the fingers without restricting the blood flow. Attach the hook tap onto the other side. Then cut a second strap of the 30 mm NRX ® strap. Round the edge and cut a hole approx 4 mm from the edge. Attach the hook tab onto the other side. 2 Apply the 50 mm strap over the two fingers and make sure that the loops are close to the MCP joint. Pull carefully to align the MCP joints. NRX ® Strap · Finger Extension Assist, Multiple joints 3 4 5 Attach the strap onto the Manex Radial platform. Make sure that the MCP joints are neutrally aligned and not over extended. Caring instructions Apply the 30 mm NRX ® strap over the affected finger and stop in front of the PIP joint. Stretch slightly without over extending the joint. Make sure that the hole in the strap is not too large so it slides over the PIP joint. The NRX ® strap can be washed in 40 degrees machine wash with a liquid detergent. Always use a laundry bag. Remove the hook parts before washing and let air dry. When correctly applied it should align the PIP joint with the MCP joint without over extending. Test the functionality on the patient. The straps should assist extension and patient should be able to flex without a problem. © Mediroyal Nordic AB 2018 Mediroyal Nordic AB · Box 7052 · 192 07 Sollentuna · Sweden · Tel +46 8 506 766 00 · info@mediroyal.se · www.mediroyal.se

Er du interessert i et produkt du finner i en katalog fra en av våre leverandører, men ikke i vår webshop? Ta kontakt med oss på tlf. 35 02 95 95 eller e-post post@alfacare.no!

Copyright © 2018 AlfaCare AS - All rights reserved